Cement mortar
Mortar is applied as a thick paste which sets hard as it cures. It creates a tight seal between bricks and blocks to prevent air and moisture entering into a construction. It can compensate for variations in brick or block size to produce an aesthetically-pleasing and structurally-sound construction. Generally, mortar is intentionally structurally weaker than the blocks or bricks it bonds, creating a sacrificial layer that is more easily repaired than defects would be in the bricks or blocks themselves.
Mortar is composed from a mixture of a fine aggregate (typically sand), a binder and water. The binder is generally either lime or cement. If lime is used, mortar is described as ‘lime mortar’ whereas if cement is used it is referred to as ‘cement mortar’ (a small amount of lime may also be also be used in cement mortars). For more information see: Types of mortar.
Lime mortar tends to bind masonry more ‘gently’ than cement mortar, as it is more flexible and gives earlier adhesion, but it gains strength more slowly. Where less flexible, dense mortars such as cement mortar are used to bind softer masonry, such as soft sandstones, they can cause local stresses leading to the deterioration of the masonry. For more information see: Lime mortar.
Cement mortar was invented by English cement manufacturer Joseph Aspdin in 1794 in order to create a cement that was stronger than lime mortar.
Water and cement set and harden through a chemical reaction known as 'hydration'. The process of hardening is described as 'curing', which requires particular conditions of temperature and humidity.
There are a number of different types of cement. Portland cement is the principal cement used in most masonry mortars. It is manufactured by heating together limestone (or chalk) and clay (or shale) in large rotary kilns. The chemistry of Portland cement largely consists of calcium silicate which reacts with water to form a strong, durable cement paste. For more information see: Cement and Portland cement.
The ratio of cement to sand is typically in the ration of 1:2 to 1:6 depending on what the mortar is being used for, with a higher proportion of sand producing a weaker mortar. Where lime is included, the ratio is express as; cement: lime: sand.
Generally, the sand and cement are first mixed until uniform, and then water is slowly added while mixing until the required consistency is achieved.
Soft sand (building sand) is generally used for bricklaying and pointing using thinner layers of mortar, whereas Sharp sand is used where a thicker layer of mortar is required.
Premixed mortars are available to which water is added.
A range of different colours can be achieved depending on the type of sand used, or by the addition of dyes. A number of admixtures can also be included to accelerate or retard drying, to make the mortar easier to work, to improve waterproofing, to increase cohesion and so on.
[edit] Related articles on Designing Buildings Wiki.
Featured articles and news
New Great British Energy partnership launched
Crown estate help to turbocharge energy independence.
ECA Industry Awards 2024 shortlist revealed
22 leading businesses from across the electrotechnical and engineering services sector.
Government unveils Skills England strategy
Skills England to transform opportunities and drive growth.
New Government Hub for York Given Planning Green Light
For up to 2,600 civil servants, due for completion by 2028.
Construction Skills Certification Scheme cards
July update on Professionally Qualified and Academically Qualified Person Cards.
BSRIA Briefing 2024, November 22
Sustainable Futures: Redefining Retrofit for Net Zero Living.
The CLC on driving competency in the retrofit sector
Previously published roadmap on skills for net zero.
The first labour government King's speech in fifteen years
Construction industry reactions, support and some concern.
CIOB Retrofit of Buildings Technical Information Sheet
What retrofit is, the approach to be taken and processes to be followed.
Adapting Historic Buildings for Energy and Carbon Efficiency
Historic England advice note 18, free download published.
10 retrofit projects revisited 10 years after completion.
Information orders, building liability orders and SPVs
Key BSA terms and how they impact special purpose vehicles.
Listed despite problems with its design.
Zen and the art of cycling exploration.
Design Council Homes Taskforce launched
To support government 1.5 million homes target within UK climate commitments.